Mining conveyor belt wear will bring greater economic losses to manufacturers, how to avoid conveyor belt wear is a topic of concern to all manufacturers, the following jingbo rubber co., ltd. put forward some Suggestions to avoid conveyor belt wear.  
        The overall conveyor must be maintained from the beginning to the end of a Central Line, to reduce the conveyor belt slope point, as far as possible to make the force point distribution evenly, this is to ensure the basic elements of the service life of the conveyor belt.Installation deviation is too large directly affects the normal operation of conveyor.For example, uneven stress on the conveyor belt, off-tracking, excessive traction resistance, reduced load efficiency and other problems will lead to abnormal wear of the conveyor belt, affecting the life of the conveyor belt.
       The conveyor belt runs at the same speed as the idler.When installing the support, make sure the axis of the idler is perpendicular to the center line of the conveyor belt. If not, take measures to make it perpendicular.
      Try not to use adjustable idlers.The centering idler can prevent the deviation of the conveyor belt to some extent, but in the process of rectifying the deviation, it will increase the wear with the conveyor belt.
       Coal mine heat resistant conveyor belt joints to ensure that the front and back of the center line coincidence, bonding method is the best cold bonding, or vulcanization connection, plasticizing connection method.Joint lap thickness and strength must meet the relevant technical standards.
     Good conveyor belt idler maintenance and maintenance, idler damage to replace in time, to ensure that the idler rotation flexible, idler rotation resistance to meet the "underground coal mine belt conveyor idler technical conditions" provisions.
      To improve the system, during the operation of the conveyor belt, there should be a special person for patrol inspection, and problems should be timely dealt with to avoid material residue entering the conveyor belt, causing wear or tear of the conveyor belt.Belt deviation should be adjusted in time to avoid belt edge wear.
       Being moderate strength of conveyor belt grow, will be subject to heavy load with no slip.
      The wear of mine conveyor belt during operation is mainly related to the quality of conveyor, idler and conveyor belt joint.Reduce the belt wear, extend the service life of the belt not only to do the above points, the quality of the conveyor and its accessories and installation technology should meet the relevant technical standards, so as to more comprehensive to avoid the belt wear.